Short Lead Time for Lead Acid Battery Charger 36v - Automatic Charging 12V 10A 7 Stage Car Battery Charger for lead acid batteries – Ligao factory and suppliers

Short Lead Time for Lead Acid Battery Charger 36v - Automatic Charging 12V 10A 7 Stage Car Battery Charger for lead acid batteries – Ligao

Short Description:

Product Detail

Company Profile

Product Tags

Feedback (2)

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of 3kva Voltage Stabilizer, 12 24v Automatic Battery Charger, 12 24v Automatic Battery Charger, Our company has already set up a professional, creative and responsible team to develop clients with the multi-win principle.

Short Lead Time for Lead Acid Battery Charger 36v - Automatic Charging 12V 10A 7 Stage Car Battery Charger for lead acid batteries – Ligao Detail:

Automatic Charging 12V 10A 7 Stage Battery Charger

Feature:

·Microprocessor Control (CPU)

·7-STAGE AUTOMATIC CHARGING

·This is a fully automatic battery charger with 7 charge stages.

·Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.

·7-stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.

·7-stage chargers are suitable for most battery types including Calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries.

·Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM.

MBC2410 实拍图

MBC 侧板通用

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Mcu Controlled & 7 stage Switchmode
Connection:
1. Cut off the supplied battery clips; ensure you leave sufficient cable to reach the battery terminals. (DO NOT extend the battery charger DC cables,as the added voltage drop will cause incorrect charging)2. Fit a ring terminal to the BLACK Negative (-) wire.3. Connect the inline fuse to the RED Positive (+) wire.4. Connect a ring terminal to the other end of the inline fuse.5.Connect the RED lead (with inline fused and ring terminal) to the Positive (+) battery post.6. Connect the BLACK lead (with ring terminal) to the negative (-) battery post.7. Fit the correctly rated fuse.No matter Size or type, leave it to MBC- charge. Power of Professionals.

Certifications

With CE,CB,ISO,ROHS certified by SGS.

Our exhibition

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Workshop

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Packaging and shipping

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Our Service

1. One year warranty.

2. OEM is AVAILABLE!

3. Excellent Pre-sales and After-sales service system.

MBC FAQ

1. Why PACO 7-stage battery charger?

1). This is a fully automatic battery charger with 7 charge stages.
2). Automatic charging protects your battery from being overcharged. You can leave the charger connected to the battery charger indefinitely.
3). Compare with traditional chargers, 7-stage charger with much more comprehensive and accurate charging process, ensure your battery longer life and better performance!
4). 7-stage chargers are suitable for most battery types including calcium, Gel and AGM batteries. They could also help restore the drained and sulphated batteries.

2. How do I know if the battery is charged?

The charger’s FULLY CHARGED LED will illuminate (solid). Alternatively use a Battery Hydrometer A reading of 1.250 or more in each cell indicates a fully charged battery.

3. I have connected the charger properly but the ‘CHARGING LED’ does not come on?

In some cases batteries can be flattened to the point where they have very little or no voltage. This can occur if a small amount of power is used for a long time, for example a map reading light is left on for a week or more. 7-Stage chargers are designed to charge from as little as 12V charger 2.0 Volts and 24V charger 4.0 Volts.

If the voltage is lower than 2.0 Volts and 4.0 Volts use a pair of booster cables to connect between two batteries to provide more than 2.0 Volts and 4.0 Volts to the battery being charged. The charger can then start to charge the battery and the booster cables can be removed.

4. Can I use the charger as a power supply?

7-Stage chargers are designed to only supply power to the battery clips when they are connected correctly to a battery. This is to prevent sparks during connection to the battery or if connected incorrectly by mistake. This safety feature prevents the charger from being used as a ‘Power Supply’. No Voltage will be present at the clips until connected to the battery.

Product detail pictures:

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Short Lead Time for Lead Acid Battery Charger 36v - Automatic Charging 12V 10A 7 Stage Car Battery Charger for lead acid batteries – Ligao , The product will supply to all over the world, such as: Oman, Bangalore, Turkmenistan, As an experienced group we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of our company is to build up a satisfactory memory to all customers, and establish a long term win-win business relationship. Choose us, we always wait for your appearance!

Paco pure sine wave inverter company information 1

Paco pure sine wave inverter company information 6

12v Battery Charger

220v Solar Inverter

Bidirectional Inverter

Charge Controller Solar

Electric Bike Battery Charger

Pwm Solar Charge Controller

Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.