Factory Cheap 902600) Paslode 902672 Li-ion Battery Charger - PACO Power Full-Automatic 7 Stage Charging 12V 20A Lead-acid Battery Charger – Ligao factory and suppliers

Factory Cheap 902600) Paslode 902672 Li-ion Battery Charger - PACO Power Full-Automatic 7 Stage Charging 12V 20A Lead-acid Battery Charger – Ligao

Short Description:

Product Detail

Product Tags

Feedback (2)

Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for Solar Inverter Without Battery, 24v Dc Battery Charger, Lithium Ion Battery Charger, With a rapid advancement and our buyers come from Europe, United States, Africa and everywhere in the world. Welcome to visit our manufacturing unit and welcome your order, for further more inquires be sure to don't hesitate to get hold of us!

Factory Cheap 902600) Paslode 902672 Li-ion Battery Charger - PACO Power Full-Automatic 7 Stage Charging 12V 20A Lead-acid Battery Charger – Ligao Detail:

Automatic Charging 12V 20A 7 Stage Battery Charger

Feature:

·Microprocessor Control (CPU)

·7-STAGE AUTOMATIC CHARGING

·This is a fully automatic battery charger with 7 charge stages.

·Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.

·7-stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.

·7-stage chargers are suitable for most battery types including Calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries.

·Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM.

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Mcu Controlled & 7 stage Switchmode
Connection:
1. Cut off the supplied battery clips; ensure you leave sufficient cable to reach the battery terminals. (DO NOT extend the battery charger DC cables,as the added voltage drop will cause incorrect charging)2. Fit a ring terminal to the BLACK Negative (-) wire.3. Connect the inline fuse to the RED Positive (+) wire.4. Connect a ring terminal to the other end of the inline fuse.5.Connect the RED lead (with inline fused and ring terminal) to the Positive (+) battery post.6. Connect the BLACK lead (with ring terminal) to the negative (-) battery post.7. Fit the correctly rated fuse.

No matter Size or type, leave it to MBC- charge. Power of Professionals.

Certifications

With CE,CB,ISO,ROHS certified by SGS.

Our exhibition

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Workshop

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Packaging and shipping

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Our Service

One year warranty.

OEM is AVAILABLE!

Excellent Pre-sales and After-sales service system.

MBC FAQ

.Why PACO 7-stage battery charger?

1). This is a fully automatic battery charger with 7 charge stages.
2). Automatic charging protects your battery from being overcharged. You can leave the charger connected to the battery charger indefinitely.
3).Compare with traditional chargers, 7-stage charger with much more comprehensive and accurate charging process, ensure your battery longer life and better performance!
4). 7-stage chargers are suitable for most battery types including calcium, Gel and AGM batteries. They could also help restore the drained and sulphated batteries.

.How do I know if the battery is charged?

The charger’s FULLY CHARGED LED will illuminate (solid). Alternatively use a Battery Hydrometer A reading of 1.250 or more in each cell indicates a fully charged battery.

.I have connected the charger properly but the ‘CHARGING LED’ does not come on?

In some cases batteries can be flattened to the point where they have very little or no voltage. This can occur if a small amount of power is used for a long time, for example a map reading light is left on for a week or more. 7-Stage chargers are designed to charge from as little as 12V charger 2.0 Volts and 24V charger 4.0 Volts.

If the voltage is lower than 2.0 Volts and 4.0 Volts use a pair of booster cables to connect between two batteries to provide more than 2.0 Volts and 4.0 Volts to the battery being charged. The charger can then start to charge the battery and the booster cables can be removed.

.Can I use the charger as a power supply?

7-Stage chargers are designed to only supply power to the battery clips when they are connected correctly to a battery. This is to prevent sparks during connection to the battery or if connected incorrectly by mistake. This safety feature prevents the charger from being used as a ‘Power Supply’. No Voltage will be present at the clips until connected to the battery.

Product detail pictures:

Related Product Guide:
DC-Coupled Solar-Plus-Storage Systems Are Gaining Ground | 2000 Power Inverter Solar
Get ready for the age of sensor panic | Power Battery Charger

Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for Factory Cheap 902600) Paslode 902672 Li-ion Battery Charger - PACO Power Full-Automatic 7 Stage Charging 12V 20A Lead-acid Battery Charger – Ligao , The product will supply to all over the world, such as: Italy, St. Petersburg, Milan, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market. We are willing to cooperate with business friends from at home and abroad and create a great future together.

12v 24v Battery Charger