2017 High quality For Paslode 7.4v Li Ion Battery Charger - China PACO Car Charger for AGM Lead acid batteries Automatic 7 Charging Stage 12V 5A – Ligao factory and suppliers

2017 High quality For Paslode 7.4v Li Ion Battery Charger - China PACO Car Charger for AGM Lead acid batteries Automatic 7 Charging Stage 12V 5A – Ligao

Short Description:

Product Detail

Company Profile

Product Tags

Feedback (2)

High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we're hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for 12v Intelligent Battery Charger, 24v Lithium Car Battery Charger, Dc Dc Inverter, With a wide range, top quality, reasonable rates and stylish designs, our products are extensively used with this industries and other industries.

2017 High quality For Paslode 7.4v Li Ion Battery Charger - China PACO Car Charger for AGM Lead acid batteries Automatic 7 Charging Stage 12V 5A – Ligao Detail:

China PACO Car Charger for AGM Lead acid batteries Automatic 7 Charging Stage 12V 5A

Feature:

·Microprocessor Control (CPU)

·7-STAGE AUTOMATIC CHARGING

·This is a fully automatic battery charger with 7 charge stages.

·Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.

·7-stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.

·7-stage chargers are suitable for most battery types including Calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries.

·Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM.

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Mcu Controlled & 7 stage Switchmode
Connection:
1. Cut off the supplied battery clips; ensure you leave sufficient cable to reach the battery terminals. (DO NOT extend the battery charger DC cables,as the added voltage drop will cause incorrect charging)2. Fit a ring terminal to the BLACK Negative (-) wire.3. Connect the inline fuse to the RED Positive (+) wire.4. Connect a ring terminal to the other end of the inline fuse.5.Connect the RED lead (with inline fused and ring terminal) to the Positive (+) battery post.6. Connect the BLACK lead (with ring terminal) to the negative (-) battery post.7. Fit the correctly rated fuse.

No matter Size or type, leave it to MBC- charge. Power of Professionals.

Certifications:

With CE,CB,ISO,ROHS certified by SGS.

Our exhibition:

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Workshop:

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Packaging and shipping:

PACO Car Battery charger MBC1205 7-stage trickle charge for car battery

Our Service:

1. One year warranty.

2. OEM is AVAILABLE!

3. Excellent Pre-sales and After-sales service system.

MBC FAQ

1. Why PACO 7-stage battery charger?

1). This is a fully automatic battery charger with 7 charge stages.
2). Automatic charging protects your battery from being overcharged. You can leave the charger connected to the battery charger indefinitely.
3). Compare with traditional chargers, 7-stage charger with much more comprehensive and accurate charging process, ensure your battery longer life and better performance!
4). 7-stage chargers are suitable for most battery types including calcium, Gel and AGM batteries. They could also help restore the drained and sulphated batteries.

2. How do I know if the battery is charged?

The charger’s FULLY CHARGED LED will illuminate (solid). Alternatively use a Battery Hydrometer A reading of 1.250 or more in each cell indicates a fully charged battery.

3. I have connected the charger properly but the ‘CHARGING LED’ does not come on?

In some cases batteries can be flattened to the point where they have very little or no voltage. This can occur if a small amount of power is used for a long time, for example a map reading light is left on for a week or more. 7-Stage chargers are designed to charge from as little as 12V charger 2.0 Volts and 24V charger 4.0 Volts.

If the voltage is lower than 2.0 Volts and 4.0 Volts use a pair of booster cables to connect between two batteries to provide more than 2.0 Volts and 4.0 Volts to the battery being charged. The charger can then start to charge the battery and the booster cables can be removed.

4. Can I use the charger as a power supply?

7-Stage chargers are designed to only supply power to the battery clips when they are connected correctly to a battery. This is to prevent sparks during connection to the battery or if connected incorrectly by mistake. This safety feature prevents the charger from being used as a ‘Power Supply’. No Voltage will be present at the clips until connected to the battery.

Product detail pictures:

Related Product Guide:
Trina introduces rooftop kit, aims at direct sales – interview | Power Battery Charger
Global PV Inverter Market 2019 Analysis and Forecast to 2024 | Dc Dc Inverter

It adheres on the tenet "Honest, industrious, enterprising, innovative" to develop new items frequently. It regards buyers, success as its very own success. Let us produce prosperous future hand in hand for 2017 High quality For Paslode 7.4v Li Ion Battery Charger - China PACO Car Charger for AGM Lead acid batteries Automatic 7 Charging Stage 12V 5A – Ligao , The product will supply to all over the world, such as: luzern, Barbados, Swansea, All the imported machines effectively control and guarantee the machining precision for the products. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality products and have the ability to develop new products to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.

Paco pure sine wave inverter company information 1